DDDL-6000JZ AC DC generator (referred to as the up flow reactor), developed by our company developed test equipment, which combines the advantages of similar products at home and abroad in a body, and adopts the technology of numerical control, anti-interference ability strong, and a generation of up flow is compared, due to the low power consumption and large capacity self coupling voltage converter and high permeability core, with the advantages of high output power, small volume, light weight, etc.. Mainly used for thermal relay, motor protector, contactor, breaker, air switch, switch cabinet, circuit breaker, protection screen check.

equipped with beautiful PVC panel

The built-in digital ammeter for direct reading

The high accuracy level 0.2

The big power, small volume, strong load ability

The test precision is high

(1) Name: SDDL-6000JZ AC and DC large current generator.

(2) the environmental groups: belong to GB6587.1-86 "electronic measuring instruments environmental tests program" in group III instrument (can) for use in an outdoor environment.

Input voltage: AC380V + 10%

Rated capacity: 30KVA

2.1 maximum output DC current value: 6000A, under the current sustainable work for 8 hours.

2.2 maximum output DC voltage value: 5V.

2.3 output current regulation: 0~6000A continuous adjustable.

DC:0-6000A AC:0-6000A

2.4 accuracy requirements:

Source: the effect is less than or equal to 0.3% ratings

Shi Piao: less than 1% of rated value

The temperature drift is less than 0.04% / C ratings:

Load effect: less than 1% ratings (output voltage change due only to the output current from zero to the rated value caused by changing rate)

Ripple voltage ratings: less than 1% +10mV.

The 2.5 line adjustment rate: 0.1%

Load adjustment rate: 0.1%

2.6 output display:

Display mode: 4 bit digital voltmeter display

Table 5 digital display for current

Table 0.1V: voltage display accuracy

Table 0.1A current

Display error: 1 words less than 0.2% meter.

1 words current meter is less than or equal to 0.2%.

2.7 the equipment should have the over-voltage, over-current, over temperature, phase automatic protection.